After doing a little more debugging, it looks like it's erroring out at the iwconfig line: +++ /sbin/iwconifg eth0 essid matrix Error for wireless request "Set ESSID" (8B1A) : SET failed on device eth0; Invalid argument. Here is a little if the dmesg output: eth0: Station identity 001f:0001:0007:001c eth0: Looks like a Lucent/Agere firmware version 7.28 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104 bit key eth0: MAC address 00:02:2D:4F:B8:CB eth0: Station name "HERMES I" eth0: ready eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f On Sun, 21 Apr 2002, Clay Fandre wrote: > So I got myself a Orinoco Gold card, and it works great in Windows, > but when I try and bring it up in Linux (using orinoco_cs) I get this > message in syslog: > > kernel: eth0: Tx error, status 4 (FID=01??) > > and then pump times out. Any idea? > > I tried both the orinoco_cs from the 2.4.18 kernel and from pcmcia_cs, > both with the same results. > > TIA > > -- Clay > > _______________________________________________ > Twin Cities Wireless Users Group Mailing List - Minneapolis/St. Paul, Minnesota > http://www.tcwug.org > tcwug-list at tcwug.org > https://mailman.real-time.com/mailman/listinfo/tcwug-list