Re: (ASCEND) Newbie Question (diagnostics mode?)

[Manfred Kwiatkowski <Kwiatkowski@zrz.TU-Berlin.DE>]

"Kevin A. Smith" <kevin@ascend.com> writes:
> 
> At 06:00 PM 2/26/98 +0100, Manfred Kwiatkowski wrote:
> >
> >And if a modem disconnects you may not see any output either.
> >On our MAXens only about 10% of the hangups will result in a debug
> >qutput.
> 
> I presume you're running versions pre 5.0Ap36? As this was fixed in
> 5.0Ap36, now all disconnections should be printed to the diagnostic
> output.

Ok, I will have to admit 5.0Ap36 ist far better than e.g. 5.0Ap13
but 'all' is overly optimistic. From a 10 minutes log:

bronto:/home/kwia4000% egrep DTR_DROP XtermLog.a0105 | wc -l
      39
bronto:/home/kwia4000% egrep 'AT\&V1' XtermLog.a0105 | wc -l
      37
bronto:/home/kwia4000% egrep 'TERMINATION REASON' XtermLog.a0105 | wc -l
      23

(May be dependend on load, uptime, hardware revisions and phase of the moon)

-- 
Manfred Kwiatkowski, ZRZ (Zentraleinrichtung Rechenzentrum), Sekr.: EN 50,
Technische Universitaet Berlin, Einsteinufer 17, D-10587 Berlin, GERMANY.
INTERNET: kwiatkowski@zrz.TU-Berlin.DE             phone: +49 30 314 24355
X.400: s=kwiatkowski ou=zrz p=tu-berlin a=d400 c=de  fax: +49 30 314 21060
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

Follow-Ups:

• Re: (ASCEND) Newbie Question (diagnostics mode?)
• From: "Kevin A. Smith" <kevin@ascend.com>

---

• Prev by Date: Re: (ASCEND) Logging IP numbers
• Next by Date: (ASCEND) Telnet to the router when using NAT?
• Prev by thread: Re: (ASCEND) Newbie Question (diagnostics mode?)
• Next by thread: Re: (ASCEND) Newbie Question (diagnostics mode?)
• Index(es):
  • Main
  • Thread