Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) problems to connect pipe50 to max4048 with 2 channels
hi all
i still have problems to connect pipeline 50 into max 4048, i tryed base
channel =2 in both, and nothing append, always get only one channel, i not
supply my config again ;-), so if you need it i will supply...so there is
wath append when i do pppif and mppcm for the max and for the pipeline
i really would like to know what wrong..??
thanks
Daniel Provencher
Internet Laurentides
max ---------------
PPPIF: open: routeid 425, incoming YES
PPPIF-72: vj comp on
PPPIF-72: _initAuthentication
PPPIF-72: auth mode 1
PPPIF-72: PAP auth, incoming
PPPIF-72: Link Is up.
PPPIF-72: pppMpNegUntimeout last 0 layer 0
PPPIF-72: pppMpNegUntimeout last 0 layer 0
PPPIF-72: LCP Opened, local 'Answer', remote ''
PPPIF-72: _openAuthentication
PPPIF-72: pppMpNegUntimeout last 0 layer 1
PPPIF-72: Auth Opened
PPPIF-72: Remote hostName is 'router'
PPPIF-72: prep MP bundle for router
PPPIF-72: assigning profile 'router'
PPPIF-72: new MP bundle
PPPIF-72: First channel, MpID 140
PPPIF: Assigning vjInfo (B05F3600) and bncpInfo(B05983C0)
PPPIF-72: CBCP Opened
PPPIF-72: pppMpSendNeg Pkt
PPPIF-72: pppMpNegTimeout layer 4
PPPIF-72: opening CCP
PPPIF-72: pppMpSendNeg Pkt
PPPIF-72: pppMpNegTimeout layer 6
PPPIF-72: opening IPNCP: 207.253.19.98 -> 207.253.19.193
PPPIF-72: pppMpSendNeg Pkt
PPPIF-72: pppMpSendNeg Pkt
PPPIF-72: pppMpSendNeg Pkt
PPPIF-72: pppMpNegTimeout layer 4
PPPIF-72: pppMpNegUntimeout last 0 layer 6
PPPIF-72: pppMpNegUntimeout last 0 layer 6
PPPIF-72: CCP Opened
PPPIF-72: pppMpNegUntimeout last 0 layer 4
PPPIF-72: pppMpNegUntimeout last 0 layer 4
PPPIF-72: IPNCP Opened to 207.253.19.193
MPP-140: mppStartSession called.
MPP-140: Event = StartSession, CurrentState = Initial/A
MPP-140: new state is: Initial/C
MPP-140: Event = RxVersionReq, CurrentState = Initial/C
MPP-140: enterIdleA, AddLock = No, RemoveLock = No
MPP-140: new state is: Idle/A
MPP-140: Event = RxAddExtReq, CurrentState = Idle/A
MPP-140: peer requested 1 channe(s)
MPP-140: 1 channel(s) OK
MPP-140: reserved 0 channel(s)
MPP-140: sending Add response
MPP-140: new state is: Add/C
MPP-140: Event = RxAddComplete, CurrentState = Add/C
MPP-140: enterIdleA, AddLock = No, RemoveLock = No
MPP-140: new state is: Idle/A
MPP-140: Event = Utilization, CurrentState = Idle/A
MPP-140: check dynamic says: current = 1, recommended = 2
MPP-140: requesting 1 additional channel(s)
MPP-140: 0 call(s) posssible.
MPP-140: new state is: Idle/A
MPP-140: Event = Utilization, CurrentState = Idle/A
MPP-140: check dynamic says: current = 1, recommended = 2
MPP-140: new state is: Idle/A
MPP-140: Event = Utilization, CurrentState = Idle/A
MPP-140: check dynamic says: current = 1, recommended = 2
MPP-140: new state is: Idle/A
MPP-140: Event = Utilization, CurrentState = Idle/A
MPP-140: check dynamic says: current = 1, recommended = 2
MPP-140: new state is: Idle/A
MPP-140: Event = Utilization, CurrentState = Idle/A
MPP-140: check dynamic says: current = 1, recommended = 2
MPP-140: new state is: Idle/A
mppcMPP-140: Event = Utilization, CurrentState = Idle/A
MPP-140: check dynamic says: current = 1, recommended = 2
MPP-140: new state is: Idle/A
and now for the pipeline
---------------------------------------
mpentry 32
MP entry 32 @ 2F2610
MpID 32, Flags: delete No, ncp Yes, mpp Yes bacp No
bundle id(task: 263990, time: 752992.72) 9 octets @ 2EC110
[0000]: 03 00 C0 7B 70 C5 35 41 54
vjInfo @ 2F6950
startTime 752834, mrru: local 1524, peer 1524
send: ifIx 0, count 0, seq 194 / recv: seq 187
IF 12, send idle 0, recv idle 1, last seq 186 mode 0 #chans 1
Head:
Reassembe packet cnt 0 bad lrg pkts 0
MPP-32: Event = Utilization, CurrentState = Idle/A
MPP-32: check dynamic says: current = 1, recommended = 2
MPP-32: new state is: Idle/A
MPP-32: Event = Utilization, CurrentState = Idle/A
MPP-32: check dynamic says: current = 1, recommended = 2
MPP-32: new state is: Idle/A
MPP-32: Event = Utilization, CurrentState = Idle/A
MPP-32: check dynamic says: current = 1, recommended = 2
MPP-32: new state is: Idle/A
MPP-32: Event = Utilization, CurrentState = Idle/A
MPP-32: check dynamic says: current = 1, recommended = 2
MPP-32: new state is: Idle/A
MPP-32: Event = Utilization, CurrentState = Idle/A
MPP-32: check dynamic says: current = 1, recommended = 2
MPP-32: new state is: Idle/A
PPPIF-12: _pppClose called
MPP-32: mppSessionTerminated
PPPIF-32: pppMpNegUntimeout last 1 layer 0
PPPIF-12: cleanup pass
MPP-32: Event = SessionTerm, CurrentState = Idle/A
MPP-0: new state is: Initial/A
PPPIF: open: routeid 19, incoming NO
PPPIF-13: vj comp on
PPPIF-13: _initAuthentication
PPPIF-13: auth mode 1
PPPIF-13: PAP auth, outgoing
PPPIF-13: Link Is up.
PPPIF-13: pppMpNegUntimeout last 0 layer 0
PPPIF-13: pppMpNegUntimeout last 0 layer 0
PPPIF-13: LCP Opened, local 'AT', remote ''
PPPIF-13: _openAuthentication
PPPIF-13: pppMpNegUntimeout last 0 layer 1
PPPIF-13: Auth Opened
PPPIF-13: Remote hostName is ''
PPPIF-13: prep MP bundle for
PPPIF-13: using profile hostname AT
_authOpened:ss->mpID == 0:AT
PPPIF-13: new MP bundle
PPPIF-13: First channel, MpID 33
PPPIF: Assigning vjInfo (2F6950) and bncpInfo(2F29D4)
PPPIF-13: pppMpSendNeg Pkt
PPPIF-13: pppMpNegTimeout layer 4
PPPIF-13: opening CCP
PPPIF-13: pppMpSendNeg Pkt
PPPIF-13: pppMpNegTimeout layer 6
PPPIF-13: opening IPNCP: 207.253.19.193 -> 207.253.19.98
PPPIF-13: pppMpSendNeg Pkt
PPPIF-13: pppMpSendNeg Pkt
PPPIF-13: pppMpNegUntimeout last 0 layer 4
PPPIF-13: pppMpNegUntimeout last 0 layer 6
PPPIF-13: pppMpNegUntimeout last 0 layer 6
PPPIF-13: CCP Opened
PPPIF-13: pppMpSendNeg Pkt
PPPIF-13: pppMpNegUntimeout last 0 layer 4
PPPIF-13: IPNCP Opened to 207.253.19.98
MPP-33: mppStartSession called.
MPP-33: Event = StartSession, CurrentState = Initial/A
MPP-33: new state is: Initial/B
MPP-33: Event = RxVersionRsp, CurrentState = Initial/B
MPP-33: requesting 1 additional channel(s)
MPP-33: 1 call(s) posssible.
MPP-33: new state is: Add/A
MPP-33: Event = RxAddExtRsp, CurrentState = Add/A
MPP-33: peer said I can add 0 channel(s).
MPP-33: sending AddComplete
MPP-33: enterIdleA, AddLock = Yes, RemoveLock = No
MPP-33: new state is: Idle/A
MPP-33: Event = Utilization, CurrentState = Idle/A
MPP-33: check dynamic says: current = 1, recommended = 2
MPP-33: new state is: Idle/A
MPP-33: Event = Utilization, CurrentState = Idle/A
MPP-33: check dynamic says: current = 1, recommended = 2
MPP-33: new state is: Idle/A
MPP-33: Event = Utilization, CurrentState = Idle/A
MPP-33: check dynamic says: current = 1, recommended = 2
MPP-33: new state is: Idle/A
MPP-33: Event = Utilization, CurrentState = Idle/A
MPP-33: check dynamic says: current = 1, recommended = 2
MPP-33: new state is: Idle/A
MPP-33: Event = Utilization, CurrentState = Idle/A
MPP-33: check dynamic says: current = 1, recommended = 2
MPP-33: new state is: Idle/A
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>