Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Q:Dial-up Static IP Address
Try adding the line "Ascend-Route-IP = Route-IP-Yes" to your static radius
profile. If I understand the way Pool-Only works, it get's overridden by
the radius entry if it's there. I don't know if you're trying to pull an
IP out of the pool that exists on the max, but if you're just pulling an
IP (like a /30 network) out of your available that aren't in the pool it
should work.
Regards,
Joe Shaw - jshaw@insync.net
NetAdmin - Insync Internet Services
On Wed, 25 Feb 1998, Darkshot wrote:
> > Kevin Steinhaus wrote:
> >
> > I'm trying to allow one customer to dialin and obtain a static IP
> > Address. I'm using Radius with the Framed-Addrss line in the users
> > file.
> >
> > I'm getting connected with no problem, however I can not ping outside
> > of the machine.
> >
> > If I set Pool Only = No on the ascend, everything works. Is there a
> > way to do this without having Pool Only=No?
> >
>
> YES!! This is one of those things that I just stumbled over; I had the
> same problem and did not want to turn Pool-only off.
>
> All you need to is set up a connection profile in the MAX itself with
> the proper IP address and other stuff. Set it to active and there
> ya go. Since the MAX was still set to Pool-Only I did not expect it
> to work, but it does, and it's secure as long as the IP address you
> select is outside the pool range. I've tried, but there is no way to
> get that IP adress without logging in through the proper connection
> profile.
>
> Since we have JAVA and web-enabled admin tools on our system, and they
> will not run unless invoked from particular IP addresses, this solved
> a huge problem for us. Now I can run the entire operation from home,
> if I have to, and that just suits the hell out of me. ;-)
>
>
> 'Shot
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: