Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) 6.0.0 for the MAX family
Thanks Tim....this was all a test to see how well we fared with the new
software
and following instructions!
8^)
At 08:57 AM 2/26/98 EST, Tim Basher wrote:
>> Is there some reason tik.m40 is missing from the FTP site? We'll need
>> 56K support for our MAXen 40xx.
>
>tik.m40 is not missing. The name of the software load has changed.
>Before you even try to download the software, run, do not walk, and
>get the release notes for 6.0.0. You can find this valuable, yet
>free information on the FTP site.
>
> ftp://ftp.ascend.com/pub/Software-Releases/Max/Release-6.0/doc/max60rn.pdf
>
>On page 13, you will find the following "sage" advice:
>
> Upgrading system software
>
> Caution: The procedure for uploading new software to Ascend units have
> changed significantly. Carefully read the new software loading procedures
> explained in this section before upgrading your system.
>
>As you read the following pages, you will find out about the "restricted"
>and "extended" loads (and thus the new names) and how do it right, so you
>don't have to drive out to a POP in order to load the old configuration
>through the console port.
>
>I won't tell you the "secret" of the new naming scheme - go read it for
>yourself.
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: