RE: (ASCEND) Max200plus

[Dean.Finkeldei@chron.com]

I had the same problem. I was forced to buy a PCMCIA serial I/O card from
Socket. Here is all the info tech support gave to me. 

·    Remove power then remove all the cards
·    Insert a Socket I/O serial card to PCMCIA slot #8
·    Connect the serial port of the Socket I/O to a terminal or computer
running a vt100 terminal program.
·    Attach the serial and power cables. Power up at 57600 N-8-1 no
flow-control
·    At the > prompt enter DF then upload the correct version of firmware
that you have previously                 downloaded
·    When the download is complete, power cycle the box
·    Reconfigure the terminal/serial connection for 9600 and configure the
Max, or use the configurator. 

-----Original Message-----
From: Edwin Ringersma [mailto:edwin@introweb.nl]
Sent: Thursday, November 18, 1999 6:06 AM
To: ascend-users@max.bungi.com
Subject: (ASCEND) Max200plus


Hello,

Can anyone tell me how to delete all settings from a max200plus. Or 
at least get access to the settings.
The max200 doesn't accept anything from the network. As you may 
know it doesn't have a console port so it's a bit unaccessible. :(
I'm looking for something like the jumper next to the big chip on a 
pipeline.

With regards,

Edwin Ringersma
MCSE, System Administrator

--------------------------------------------------------
   IntroWeb                Postbus 724 7550 AS Hengelo
   Tel: 074 - 243 01 05    Welbergweg 30
   Fax: 074 - 242 98 95    7556 PE Hengelo
   http://www.introweb.nl  Holland                     
--------------------------------------------------------
  Internet Access & Corporate Internet Solutions
--------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>