Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Busy out all Modem Dial-in and still let in ISDN
Hi Raymond,
upgrade to 7.0.4 or up, there is a new feature DNIS Limit:
DNIS Limitation=Yes ^
Unspecified max calls=0
Unspecified max Modem=0
Unspecified max HDLC=0
Unspecified max V110=0
DNIS #1=
DNIS #1 max calls=0
DNIS #1 max Modem=0
DNIS #1 max HDLC=0
DNIS #1 max V110=0
DNIS #2=
DNIS #2 max calls=0
DNIS #2 max Modem=0
DNIS #2 max HDLC=0
DNIS #2 max V110=0
hope this can help you.
regards/james
At 11:59 99-9-3 -0700, Raymond Brighenti wrote:
>Hi all,
>
>We have a situation where the Power at our main POP will be cut for a few
>hours. We have a Second POP connected via ISDN which won't have the power
>drop and will continue to accept calls once the main goes down but won't
>have any link to Authenticate or route with.
>
>So is it possible to set a Max2000 so that any incoming Analog calls come
>up as busy but it still accepts ISDN (the only ISDN we have at this POP is
>the Link) so that when the main POP comes up again and dials it up it will
>allow it so that I can then enable the Analog lines again.(The second POP
>is about and hour away and the building will be inaccessible during the
>time of the blackout)
>
>- If I go into the Modem settings in the Max and set Modemslot to dis slot
>for both cards will the unit still accept the calls but fail because it
>can't route the call to Modem card or will it be smart enough to busy out
>Analog calls?
>
>Thanks
>
>Ray
>
>
>
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>