Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) 7.2.3 for the Max
We've been running 6.1.24 for 90+ days without a problem.
Regards,
J. Tyler Kinchen
@:tyler_kinchen@ml.com
-----Original Message-----
From: Jim Williams [mailto:jaw12@ntrnet.net]
Sent: Thursday, September 23, 1999 2:09 PM
To: 'Matt Holdrege'; ascend-users@bungi.com
Subject: RE: (ASCEND) 7.2.3 for the Max
What is currently the most stable release of code that
everyone is running
for the Max 4004 series boxes?
Jim Williams
President
Ntrnet Systems, Inc.
jaw12@ntrnet.net
919.484.0504 x122
fax: 919.484.0782
-----Original Message-----
From: owner-ascend-users@max.bungi.com
[mailto:owner-ascend-users@max.bungi.com]On Behalf Of Matt
Holdrege
Sent: Wednesday, September 22, 1999 1:50 AM
To: ascend-users@bungi.com
Subject: (ASCEND) 7.2.3 for the Max
TAOS 7.2.3 software for the MAX family has been given to
Customer Support.
This release contains the following:
Corrections
TR 2879: In Terminal Server menu mode, unavailable
selections could be
chosen.
TR 2987: MAX 4000 was running without V.110 card, but it
answered a V.110
call.
TR 3828: You could not disable modems via SNMP if the MAX
was answering too
many incoming calls.
TR 4210: ATMP RIP was sent by home agent, even though ATMP
RIP was set to
Off.
TR 4251: Routing problems occurred because dynamic routes
were not updated
to the Max that had the outgoing profile.
TR 4323: PIAF could not communicate with CLID auth using
RADIUS.
TR 4615: Max 4004 reset occasionally with FE1. This occurred
with ISDN
calls, 4 PRI lines and using IP protocol.
TR 4679: MAX reset occasionally with FE8 when PPTP was used
from PIAFS
terminal.
TR 4868: MAX supporting OSPF, generated warnings 175, 200,
and 201.
TR 4879: Protection violation errors related to IPX were
occurring.
TR 4888: Max units with L2TP configurations would have some
configuration
corruption when upgrading to 7.0+ software.
TR 4922: EchoSuppressToneDisable parameter disabled tone for
all calls.
TR 4967: Variables were missing for L2TP/ATMP/PPTP bits in
sysSPROM option
in Ascend MIB.
TR 4996: LNS could not do CLID/DNIS authentication.
TR 5181: Radius Accounting was not working when Auth-Type
was set to
RADIUS/LOGOUT.
TR 5305: The response to the ID packet was being rejected
due to an older
code version.
TR 5314: Low ISDN login rate in stacking environment.
TR 5325: The IP Global profile was not available during
system
initialization.
TR 250283: Using different trunk numbers for each BRI
channel did not work.
TR 258640: The MAX 4000 was not setting the M-BIT during
data transfer
between the modem client and the X25 Host.
TR 258646: L2TP and AAC authentication failed when a single
RADIUS server
was used.
TR 258648: Overlap receiving ISDN mode option was missing in
the febk.m40
software load.
TR 258738: MAX did not differentiate between user-defined
and telco-defined
CLID numbers.
TR 258756: FTP failed when using Firewall and NAT on the
same Dialout
profile.
TR 258787: The Filter ID attribute was not working.
TR 258813: Occasionally, the MAX showed available modems as
busy with the
avm diagnostic command.
TR 258821: Ghost ATMP tunnels were created and were not
removed on the Home
Agent.
TR 258831: LNS could not do CLID/DNIS authentication.
TR 258836: The Max units reset with a FE29 after having
received multiple
Warning 104 messages.
TR 258851: The MAX unit reported incorrect baud rates for
L2TP and PPTP
sessions.
TR 258864: SNMP trap was not being sent when E1/PRI went
from DF status to
TE status.
TR 1000145: MAX 6000 reboot with FE17 and warning 179. This
occurred under
heavy data over ISDN, R2 outdial load.
TR 1000195: FE 29 occurred during MP outdial.
TR 1000214: MAX path MTU discovery was broken for ATMP GRE.
MTU was zero
and force fragmentation was off.
TR 1000221: After reboot, the MAX 6000 would not accept or
send calls.
TR 1000223: Incorrect information element was being sent in
the call
proceeding the PRI call.
Conexant (formerly Rockwell) firmware versions
Digital modem module Conexant versions
K56-8, -12, and -16 2.098
V.34 Modem-12 1.610G24
V.34 Modem-8 1.610G19
Notice of discontinuance:
Software support for v.34 slot cards.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to
ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to
ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>