Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 7.2.3 for the Max
Like I said, no obvious complaints. Sure we have issues with modems
occasionally, but its usually worked out with a flash upgrade or the like.
Currently here are a list of the speeds connected now, sorted by speed.
Majority of connections are decent as far as I'm concerned. I do only run
analog on my 4xxx's and no stacking or anything else weird.
14400 14400 PPP
14400 14400 PPP
21600 16800 PPP
26400 24000 PPP
26400 24000 PPP
26400 26400 PPP
26400 26400 PPP
26400 26400 PPP
26400 26400 PPP
26400 28800 PPP
26400 28800 PPP
28800 24000 PPP
28800 26400 PPP
28800 28800 PPP
28800 28800 PPP
36000 28800 PPP
36000 33600 PPP
36000 28800 PPP
36000 28800 PPP
36000 26400 PPP
40000 26400 PPP
40000 26400 PPP
40000 28800 PPP
40000 26400 PPP
40000 26400 PPP
42000 26400 PPP
42000 26400 PPP
42000 26400 PPP
42000 28800 PPP
42667 26400 PPP
44000 26400 PPP
45333 24000 PPP
46000 24000 PPP
46000 28800 PPP
46000 28800 PPP
46667 26400 PPP
48000 24000 PPP
48000 24000 PPP
48000 26400 PPP
48000 26400 PPP
49333 24000 PPP
49333 26400 PPP
49333 26400 PPP
49333 28800 PPP
On Wed, 29 Sep 1999, Jason Nealis wrote:
>
>
> Well, I have to ask, there has been a number of modem enhancements since that code that
> stabilizes out V.90 and addresses some X2 compatibility issues in regards to working with V.90? So
> why not upgrade?
>
> Unless your only running V.34?
>
> Jason Nealis
> RCN
>
>
> On Wed, Sep 29, 1999 at 03:56:34PM -0500, Andy Walden stated
> >
> > My $.02 :)
> >
> > ts-4% sh uptime
> > system uptime: up 485 days, 4 hours, 8 minutes, 8 seconds
> >
> > Software +6.1.0+
> >
> > --
> > -----------------------------------------------------------------------
> > Andy Walden Work Email: andy@mtco.com.
> > Network Administrator, Pers Email: andy@netimagination.com.
> > MTCO Communications Phone: (800) 859-6826
> > "A little nonsense now and then, is relished by the wisest men."
> > -Willi Wonka
> >
> >
> > On Wed, 29 Sep 1999, Oliver J Albrecht wrote:
> >
> > > Hi,
> > >
> > > In article <70955c70e713@news.allcon.net> you wrote:
> > >
> > > >Interesting, thought 7.0.x was the last release for the 40xx series... How
> > > >about a 6.1.xx update that includes the updated modem code? Our WinModem
> > > >users are non-too-happy with Ascend since that is the only person we can
> > > >blame for the lack of updates in this branch. Now, if 7.2.x will run on the
> > > >40xx, that may be an option, but I suggest everyone wait 6-8 months for the
> > > >bugs to be ironed out, it tends to take that long.
> > >
> > > Why not use 7.0.X on the 4000? Depending on you configuration, 7.0.4
> > > will probably be just fine. It ran without problems for over 4 months
> > > on all our Maxen (2000 through 6000), until we updated them today to
> > > run 7.0.22 (the 4000's) and 7.2.3 (the rest). YMMV...
> > >
> > > FWIW, if I remember right, 6.1.X included the infamous HDLC zombie bug
> > > up to around 6.1.7. Was that ever fixed in that branch? I remember we
> > > went right to the 7.0 betas due to this one. 7.0.4 was definitely the
> > > most stable release we ever ran on an Ascend box so far.
> > >
> > > --
> > > Oliver J. Albrecht AllCon GmbH http://www.allcon.net/
> > > Network Administration Westerallee 139 Tel: +49 461 90393-0
> > > olli@spike.allcon.net D-24941 Flensburg Fax: +49 461 90393-33
> > > ++ Ascend Users Mailing List ++
> > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> > >
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
> --
> Jason Nealis
> Director of Internet Operations
> RCN
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>