(ASCEND) Re: Max and NAT

[Dean Frye <dafrye@lucent.com>]

Robert, I just checked febck.m20 7.2.3 and NAT is definitely there. You
probably need to have the 'c' RAS load or a non 'v' Voice load anyway. If
you need OSPF, you will need to try an 'i' IP load.

cheers,

dean


At 03:17 PM 2/9/00 +0100, Robert Koruna wrote:
>Had feik.m20 version 7.2.3, but downgraded again. No NAT in 7.2.3.
>
>Regards,
>
>Robert
>
> 
>> What software are you running? I confirmed it is supported from 7.0.0.
>> 
>> 
>> Regards,
>> 
>> dean
>> 
>> At 02:37 PM 2/9/00 +0100, you wrote:
>> >Dean,
>> >
>> >no, that's my problem. Don't see a Ethernet -> NAT option.
>> >Found this feature on the pipelines (Searched the web for it) and
>> >wanted to know if I need a software upgrade another software
>> >featureset or if this featureset is hardcoded in the max 2012.
>> >
>> >Do you know something about ?
>> >
>> >Thanks for responding,
>> >
>> >Robert
>> >
>> >> 
>> >> Robert,
>> >> 
>> >> 
>> >>  From memory this is supported on the 2000. Do you find a menu
>> >>  Ethernet->Nat...
>> >> 
>> >> 
>> >> Regards,
>> >> 
>> >> dean
>> >> 
>> >> At 10:44 AM 2/9/00 +0100, you wrote:
>> >> >Hello,
>> >> >
>> >> >we're using a MAX 2012 software version 6.1.24
>> >> >
>> >> >Does anybody know if this max supports NAT (network addres 
>> >> >translation) ?
>> >> >
>> >> >I would like to use the max to dialin to an ISP, get 1 dynamic IP
>> >> >address, and use it to connect my internal LAN.

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>