Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Re: [Oz-ISP] How hard can it be to get data from a Max 4060?
Rahul,
Reboot of the Max usually log a cause of the reset in the Fatal Log in the
diagnostic mode. I think only solutions for you is to report this errors to
Lucent/Ascend TAC, because only their engineering resources are able to help
you to resolve this.
And I hope they are still responding even if one has no contract!
Al
>From: "Rahul Verma" <rahulverma@pinkline.net>
>To: "David Latter" <dl@origin.net.au>, "Ross Wheeler"
><ross@home.albury.net.au>, "Leigh Hart" <hart@dotat.com>
>CC: <aussie-isp@aussie.net>, <ascend-users@bungi.com>
>Subject: Re: (ASCEND) Re: [Oz-ISP] How hard can it be to get data from a
>Max 4060?
>Date: Sun, 11 Jun 2000 20:54:24 +0530
>
>Hi List,
>
>my MAX 6000, automatically reboot's while post , anyone has idea how to fix
>that ,,i m in gr8 mesh
>
>
>thanks in advance
>RAHUL
>Network Administration
>Jaipur/ India
>
>----- Original Message -----
>From: "David Latter" <dl@origin.net.au>
>To: "Ross Wheeler" <ross@home.albury.net.au>; "Leigh Hart" <hart@dotat.com>
>Cc: <aussie-isp@aussie.net>; <ascend-users@bungi.com>
>Sent: Sunday, June 11, 2000 7:10 PM
>Subject: RE: (ASCEND) Re: [Oz-ISP] How hard can it be to get data from a
>Max
>4060?
>
>
> >
> >
> > I have asked this question a few times and I made a hack solutions. I
>was
> > teaching myself perl (and still am :) and I came across some scripts and
> > hacked together a way to do it.
> >
> > I telnet into that max then issue the commands show ip address (I use
>this
> > data to match the IP address to a wan port) then show users (I do this
>to
> > same some load as I am already in the max I might as well count the
>users)
> > from this I get the wan port then make a MRTG cfg file and do some stuff
>to
> > it and that graphs the 2 (or how ever many there are) links.
> >
> > If you would like me to post it her just say so.
> >
> > WARRING... They are hacked together and I use a combo of perl and bash
>files
> > to get this data so it is not pretty but it did the job. I now know a
>bit
> > more about perl (I still have a long way to go :) and am in the middle
>of
> > writing a new perl program to get rid of the bash stuff but I don't know
> > when that will be available.
> >
> >
> >
> > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> > David Latter Phone: +61 3 5441 8000
> > Director Fax: +61 3 5444 0075
> > Origin Internet Solutions Pty Ltd Level 1, 95 Mitchell St
> > dl@origin.net.au Bendigo, Vic 3144 Australia
> > http://www.origin.net.au
> > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> >
> > -----Original Message-----
> > From: owner-ascend-users@max.bungi.com
> > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Ross Wheeler
> > Sent: Sunday, 11 June 2000 5:58 PM
> > To: Leigh Hart
> > Cc: aussie-isp@aussie.net; ascend-users@bungi.com
> > Subject: (ASCEND) Re: [Oz-ISP] How hard can it be to get data from a Max
> > 4060?
> >
> >
> >
> > > Hi Ross,
> > >
> > > Ross Wheeler <ross@home.albury.net.au> wrote:
> > > >
> > > > This is driving me nuts.
> > >
> > > :)
> >
> > At least you didn't use the "Ah, we've all know you've been nuts for
> > years, don't blame it on this!" line :-)
> >
> >
> > > > All I want to do is monitor the traffic over a 128K MPP or
> > > > MP ISDN circuit.
> > >
> > > Silly question: why don't you just use the radius detail records
> > > to bill your isdn clients, the same way you bill your modem ones?
> >
> > Simple. I only get detail at the end of each call. I want to monitor
>this
> > link /in near real time/ so I can ensure it's not getting
>over-subscribed.
> > It's a link to one of our small remote POPs, and I need to make sure
>it's
> > not getting flogged! (and so I can plan capacity upgrades before they
>are
> > too late)
> >
> >
> > > Before you jump up and say "Because 32 bit integer rollover on my
> > > interface counters bites rabid donkey's gonads!", I have an answer
> > > for that too - set your "MAX CALL DURATION" or whatever equivalent
> > > parameter you can in maxen to 3 days.
> >
> > That's fine, for customers.
> >
> >
> > > If your maxen can't do "MAX CALL DURATION", then write a script
> > > that polls the NAS every hour and kills off any session that's
> > > been up longer than 3 days.
> >
> > See above.
> >
> >
> > > The only downside to this simple, yet elegant solution is you add
> > > 10 more flagfalls per month to your customer's ISDN bill. There's
> > > no problem with the time it takes either, ISDN redials lickety-split.
> >
> > Or, if I want to do it every 5 minutes, that's 24 flagfalls per hour (2
> > channels, 12 times per hour) for 24 hours a day, for 30+ days a month,
> > that's an /expensive/ way to monitor the link :-)
> >
> > Thanks Leigh... but I do have a need to monitor it without just dropping
> > the call (for what it's worth, thats how I /bill/ the customers now, but
>I
> > want to MONITOR links too...)
> >
> > RossW
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>