RE: (ASCEND) Takes soooo long to here the first beep.

["Daniel J. Vance" <techlists@rvi.net>]

As far as I know, if you have a max with only modems in it, you can set the
slot to 4 for every channel and the max will roll every call over to a
modem.

-Daniel

----------------------------------------------
Daniel J. Vance       | dvance@rvi.net
Systems Administrator | http://www.adninternet.com
541-472-0733          | ADN Internet, Inc. (ASN 14342)


-----Original Message-----
From: PowerNet [mailto:psc5@powersupply.net]
Sent: Thursday, March 30, 2000 6:45 AM
To: techlists@rvi.net
Subject: RE: (ASCEND) Takes soooo long to here the first beep.


So you are saying that every channel needs to be set to 4?
Will it automatically roll to all the modems that way?

*********** REPLY SEPARATOR ***********

On 3/29/00, at 9:32 PM, Daniel J. Vance wrote:

>Yea, I just checked our four maxes, and every single channel was set to
slot
>4.
>
>-Daniel
>
>----------------------------------------------
>Daniel J. Vance       | dvance@rvi.net
>Systems Administrator | http://www.adninternet.com
>541-472-0733          | ADN Internet, Inc. (ASN 14342)
>
>
>-----Original Message-----
>From: Tim Patterson [mailto:ttt@harborside.com]
>Sent: Wednesday, March 29, 2000 5:33 PM
>To: Daniel J. Vance
>Subject: Re: (ASCEND) Takes soooo long to here the first beep.
>
>
>Be sure that you have *all* channels set to 3 or 4
>This is a standard misconfiguration that we make all the time when
>setting up a new box, that is missing one of the modems.
>
>If we do, we get exactly your tone issue.
>
>
>Tim
>
>----- Original Message -----
>From: Daniel J. Vance <techlists@rvi.net>
>To: Andy Walden <andy@tigerteam.net>
>Cc: Ascend List <ascend-users@bungi.com>
>Sent: Wednesday, March 29, 2000 12:40 PM
>Subject: RE: (ASCEND) Takes soooo long to here the first beep.
>
>
>> Well,
>>
>> The thing is, I see the call come into the max immediately.  Hmm...I have
>> all channels set to slot 4.
>>
>> By the way, this is a 6096.  We have multiple 6096s and it seems that the
>> busier the max is, the longer it takes for the call to be answered by a
>> modem.
>>
>> Thanks,
>> Daniel
>>
>> ----------------------------------------------
>> Daniel J. Vance       | dvance@rvi.net
>> Systems Administrator | http://www.adninternet.com
>> 541-472-0733          | ADN Internet, Inc. (ASN 14342)
>>
>>
>> -----Original Message-----
>> From: Andy Walden [mailto:andy@tigerteam.net]
>> Sent: Wednesday, March 29, 2000 12:37 PM
>> To: Daniel J. Vance
>> Cc: Ascend List
>> Subject: Re: (ASCEND) Takes soooo long to here the first beep.
>>
>>
>>
>> > When I dial into my max, it takes like up to 20 seconds before I here
>the
>> > initial tone.
>>
>> Possibly a wink issue? But that doesn't make much sense since it you do
>> evntually hear it...
>>
>> > Any reason why this would happen?  Also, I have customers complaining
>that
>> > they hearing solid tones that never quit....Just a solid tone.
>>
>> The solid tone is an ISDN tone. Make sure all your channels are pointing
>> at modems in the Max.
>>
>> andy
>>
>>
>> ++ Ascend Users Mailing List ++
>> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>