Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) OSPF: network routes not announced
At 03:02 PM 2/14/98 +0100, Jens Glaser wrote:
>Hi,
>
>this is driving me crazy (MAX 2000 5.0Ap42):
>
>The route for WAN network (62.152.25.0/24) shows up in the IP routing table
>of the MAX but it isn't announced via OSPF.
>
>ascend% iproute show
>Destination Gateway IF Flg Pref Met Use Age
>[..]
>62.152.25.0/24 62.152.25.0 wan54 rGT 100 1 14 65
>62.152.25.0/24 62.152.25.0 wan54 *SG 120 7 1 913
>62.152.25.0/32 62.152.25.0 wan54 rT 100 1 0 65
>62.152.25.0/32 62.152.25.0 wan54 *S 120 7 1 1157
>[..]
>
>The adjacent cisco 3620 router only receives the the 62.152.50.0/32 route
over
>OSPF, which doesn't make too much sense (should be the /24!).
>
>In the connection profile only "LAN Adrs=62.152.25.0/24" is specified.
In the LAN adrs, you are specifying the remote endpoint of the point-to-point
PPP link. Is this really supposed to be .0/24 ? I thought a /24 address could
NOT end in a .0 or a .255 (reserved for the network and broadcast addresses?).
If you set the LAN Adrs to whatever is on the remote end of the link (.1
?), then
does this change the OSPF output for that network?
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: