Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) P75 NAT & Telnet
On Thu, 4 Jun 1998, R. Marc wrote:
> > I have installed several P75s doing NAT. I would like to configure the
> > P75 so I can telnet from remote and hit the P75 to do some
> > re-configurations. I did get this working once, but something happened to
> > the settings and I've not been able to recreate it. Static mapping is in
> > place for TCP port 23 to go to the P75's private IP address. Telnet from
> > the internal LAN works fine, just not from the outside.
>
> Are you getting a static or a dynamic IP address from your upstream
> provider? If it is dynamic, you obviously have to find out the address
> first :).
It's at static IP.
>
> On one of my pipelines, I have the static mapping set so that port 23 goes
> to the internal ethernet address (as opposed to the wan interface) which
> seems to work fine.
>
> Static Map 01
> >Valid=Yes
> Dst Port #=23
> Protocol=TCP
> Loc Port #=23
> Loc Adrs=200.200.200.254
I have exactly the same but my Loc Adrs=129.0.0.254
.............. ....................................
Thomas T. Thai Infomedia Interactive Communications
tom@iic.net TEL 612.376.9090 * FAX 612.376.9087
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: