Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Question On Services
This is and outbound profile for an ISDN P75 user :
hello-out Password = "ascend", User-Service = Dialout-Framed-User
User-Name = "hello",
Ascend-Dial-Number = "95551212",
Framed-Protocol = MPP,
Framed-Address = 10.10.10.153,
Framed-Netmask = 255.255.255.248,
Ascend-Send-Auth = Send-Auth-CHAP,
Ascend-Send-Secret = "hello",
Ascend-Data-Svc = Switched-64K,
Ascend-Bridge = Bridge-No,
Ascend-Route-IP = Route-IP-Yes,
Ascend-Route-IPX = Route-IPX-No,
Ascend-Link-Compression = Link-Comp-Stac,
Ascend-Idle-Limit = 120
route-maxname-1 Password = "ascend", User-Service = Dialout-Framed-User
Framed-Route = "10.10.10.152/29 10.10.10.153 10 n hello-out",
This should work. Note... the 9 before the phone number defines the trunk.
If you are not using trunk groups you don't need it.
Sincerely,
Nelson Llabona
-----Original Message-----
From: ascendlist@visn.net [SMTP:ascendlist@visn.net]
Sent: Monday, June 15, 1998 1:45 PM
To: ascend-users@bungi.com
Subject: (ASCEND) Question On Services
I am about to try and set up dedicated outgoing isdn calling through my
4048 to customers locations. Is anyone has any suggestions or hints
they would be appreciated.
Aaron Woldman
Vision Net
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>