Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Routing on Multiple Maxes
Jason,
Thanks for the advice. I installed 5.0Ap42 and the problem still
exist any suggestion?
Thanks.
>
> I'd look at upgrading that Max to 5.0, (Pref.. 5.0ap42) the release
> of 4.6Ci is a reflection of the old ascend where problems just seemed
> to appear for no apparent reason, With the focus of Ascend engineering
> on stability your best bet is to load on of the new releases and
> see if the problem is still apparent, If so then we can go from there,
> Trouble shooting anything under 5.0 is pretty much worthless, Even
> Ascend's first response is going to be "Please upgrade to 5.0Ap42",
>
> Regards,
>
> Jason Nealis
> Director Internet Operations
> Network Access
> Erols Internet
>
>
> On Thu, 5 Feb 1998, Vinh NGO wrote:
>
> > I have 2 Max4000 running on 4.6Ci28.
> >
> > Occationally users having route problem when connect to the second
> > Max.
> >
> > The Second Max authenticate and allocated the user an IP. I can ping
> > and traceroute to the user from the second Max. But not from the
> > first Max.
> >
> > the config on both max as follow:
> > RIP=Both-v1
> > Ignore Def Rt=No
> > Proxy Mode=Active
> > Filter=0
> >
> > Thanks.
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: