Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Routing on Multiple Maxes
Are you using RADIUS authentication behind these two MAXen?
What does the routing table on each MAX look like when the user
connects to the second MAX, an has this trouble?
At 09:37 AM 2/10/98 +8, Vinh NGO wrote:
>Jason,
>
>Thanks for the advice. I installed 5.0Ap42 and the problem still
>exist any suggestion?
>
>Thanks.
>
>
>>
>> I'd look at upgrading that Max to 5.0, (Pref.. 5.0ap42) the release
>> of 4.6Ci is a reflection of the old ascend where problems just seemed
>> to appear for no apparent reason, With the focus of Ascend engineering
>> on stability your best bet is to load on of the new releases and
>> see if the problem is still apparent, If so then we can go from there,
>> Trouble shooting anything under 5.0 is pretty much worthless, Even
>> Ascend's first response is going to be "Please upgrade to 5.0Ap42",
>>
>> Regards,
>>
>> Jason Nealis
>> Director Internet Operations
>> Network Access
>> Erols Internet
>>
>>
>> On Thu, 5 Feb 1998, Vinh NGO wrote:
>>
>> > I have 2 Max4000 running on 4.6Ci28.
>> >
>> > Occationally users having route problem when connect to the second
>> > Max.
>> >
>> > The Second Max authenticate and allocated the user an IP. I can ping
>> > and traceroute to the user from the second Max. But not from the
>> > first Max.
>> >
>> > the config on both max as follow:
>> > RIP=Both-v1
>> > Ignore Def Rt=No
>> > Proxy Mode=Active
>> > Filter=0
>> >
>> > Thanks.
>> > ++ Ascend Users Mailing List ++
>> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
>> >
>>
>>
>>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: