Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Routing on Multiple Maxes
Kevin,
Thanks for the reply.
I have radius authentication for both MAX(s). With Route-IP-Yes.
Also a static route entry on each MAX(s).
After monitor the MAX(S) for a while I decided to remove the static
entry on the MAX(S) and leave radius do the routing bit. I turn off
RIP and allow proxy mode= active on the MAX(S) and it works.
> Date:
Tue, 10 Feb 1998 12:21:11 -0800
> To: vninfo@ca.com.au
> From: "Kevin A. Smith" <kevin@ascend.com>
> Subject: Re: (ASCEND) Routing on Multiple Maxes
> Cc: ascend-users@bungi.com
> Are you using RADIUS authentication behind these two MAXen?
>
> What does the routing table on each MAX look like when the user
> connects to the second MAX, an has this trouble?
>
> At 09:37 AM 2/10/98 +8, Vinh NGO wrote:
> >Jason,
> >
> >Thanks for the advice. I installed 5.0Ap42 and the problem still
> >exist any suggestion?
> >
> >Thanks.
> >
> >
> >>
> >> I'd look at upgrading that Max to 5.0, (Pref.. 5.0ap42) the release
> >> of 4.6Ci is a reflection of the old ascend where problems just seemed
> >> to appear for no apparent reason, With the focus of Ascend engineering
> >> on stability your best bet is to load on of the new releases and
> >> see if the problem is still apparent, If so then we can go from there,
> >> Trouble shooting anything under 5.0 is pretty much worthless, Even
> >> Ascend's first response is going to be "Please upgrade to 5.0Ap42",
> >>
> >> Regards,
> >>
> >> Jason Nealis
> >> Director Internet Operations
> >> Network Access
> >> Erols Internet
> >>
> >>
> >> On Thu, 5 Feb 1998, Vinh NGO wrote:
> >>
> >> > I have 2 Max4000 running on 4.6Ci28.
> >> >
> >> > Occationally users having route problem when connect to the second
> >> > Max.
> >> >
> >> > The Second Max authenticate and allocated the user an IP. I can ping
> >> > and traceroute to the user from the second Max. But not from the
> >> > first Max.
> >> >
> >> > the config on both max as follow:
> >> > RIP=Both-v1
> >> > Ignore Def Rt=No
> >> > Proxy Mode=Active
> >> > Filter=0
> >> >
> >> > Thanks.
> >> > ++ Ascend Users Mailing List ++
> >> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> >> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >> >
> >>
> >>
> >>
> >++ Ascend Users Mailing List ++
> >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
> Kevin
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: