Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Weird 0.2.0.0 Route
Weird problem showing up while doing a traceroute....
Pipeline 130 connected via frame relay to 2 different Max2000's. Ping times
are double what they normally are....Here is the output of a traceroute from
inside one of the Maxen. The other Maxen shows the same output even though
it is on a different frame relay circuit.
ascend% traceroute 38.153.248.1
traceroute to 38.153.248.1 (38.153.248.1), 30 hops max, 0 byte packets
1 (0.2.0.0) 390 ms 90 ms 120 ms
ascend%
When I traceroute from inside the pipe, the IP addresses are correct....but
the ping times are still too high. We have been getting about 60 ms ping
times to these branches.....
Any reason that this 0.2.0.0 route is showing up....It is not in any of
the routing tables, either in the max or in the pipeline.....Where is it
coming from.....?????
The Maxen are on 5.0Ap27
The Pipe is on 5.1Ap6
Anybody got any ideas.....???? We have 5 pipeline 130's connecting to 2 Max
2000's, only 3 of the p130's are exibiting this problem....?????
Thanks...
______________________________________
Alex Simpson
Director of Technical Services
NetSolutions Corp
alex@nscorp.net
http://www.nscorp.net
http://www.connect-ed.net
615.367.4404 x101
615.367.3887 fax
615.303.7411 pager
Airport Executive Plaza
1321 Murfreesboro Rd
Suite 721
Nashville, TN 37217
__________________________________
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: