Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Bad connectivity
Prior to ap36 we fixed that exact problem by turning on LQM. We are currently
running ap36 with LQM turned off and have heard nothing negative from our
customers. If you are running a release prior to ap36 the only fix is to turn on
LQM but if you have any WinCE customers they will not be able to connect. The
WinCE TCP/IP stack is even more broken than the others. Microsoft are confident
it will be fixed in the V3 release.
Cheers
Martin Hannigan wrote:
> Below is a very common report we get from our customers.
>
> Everything I'm reading and experiencing is leading me to believe
> retrains is the culprit. We are running Software version 1.3Ap17.
>
> Is there a way to tell which version of Rockwell is integrated into
> this? Or a list of "known" issues with this code?
>
> >>Tech Support reports customers dialing into xcom with the following
> problems:
> >>either slowness
> >>or routing seems to stall or become slow for a time and then correct itself.
> >>ts was watching the times on the ping for one (dynamic IP) customer,
> edfanjoy
> >>and the times would be low for a while, then spike, then drop back down,
> then
> >>spike again... all without the customer doing anything to the connection.
> TS
> >>estimates that the cycle was about 20 seconds.
> >>Calling
>
> Regards,
>
> --
> Martin Hannigan hannigan@xcom.net
> Director of Data Networks V:617.500.0108
> XCOM Technologies, INC. F:617.500.0002
> The Leading Carrier for ISP's http://www.xcom.net
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: