Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Telnet to the router when using NAT?


On 27 February 1998, Phillip Vandry <vandry@Mlink.NET> wrote:
> How can you telnet to a Pipeline which is NATting with Single IP address,
> coming from the public side?
> 
> I have tried a static map of the form:
> 
>  x >Valid=Yes                   x
>  x  Dst Port #=23               x
>  x  Protocol=TCP                x
>  x  Loc Port #=23               x
>  x  Loc Adrs=192.168.2.254      x
> 
> Where 192.168.2.254 is the inside (Ethernet) address of the Pipeline, but
> this doesn't work.

Try:

  x >Valid=Yes                   x
  x  Dst Port #=2023             x
  x  Protocol=TCP                x
  x  Loc Port #=23               x
  x  Loc Adrs=192.168.2.254      x

Using Dst Port 2023 (etc..) works ok for me using b.p75 5.1Ap6.

Now use:    telnet <public.P75.address> 2023

[Zap]

> -Phil
[Zap]


/Falk
-- 
 Thomas Falk Claezon             ERICSSON, AXE Research and Development
 Phone:   +46 8  727 34 12       Box 1505
 Mobile:  +46 70 536 31 01       S-125 25 ALVSJO
 Fax:     +46 8  647 82 76       SWEDEN
 Email:   falk@uab.ericsson.se

 URL:             http://www.elfi.adbkons.se/~falk/
 PGP Public Key:  http://www.elfi.adbkons.se/~falk/PGP.html
 PGP Fingerprint: 0E 0F 39 7C 1D C4 7E 2C  66 DB 20 49 9B DB BB 56
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
Follow-Ups: References: