(ASCEND) Re: ascend-users-digest V96 #1632

["Keith Willis" <kwillis@taloncc.com>]

You may want to also add the /20 route to your Backbone router (or learn it
via BGP/RIP, etc)...Might save some headache not relying on the
Dynamic/Learned routes for the /20. Just a suggestion.  Your route table is
key to this one.....comparing the TNTs table to your Backbone router will
probably make the discrepancy stand out like a sore thumb.....Good Luck!

>From: "Robert Hof" <rhof@NETinc.ca>
>
>Hi, I'm having a bit of a routing problem:
>
>I have an SDSL connection to another ISP in town, and the link is up fine.
>They have a whole bunch of networks, of which
>
>204.225.16.0/20
>
>is one.  In the TNT, I have set up the following static route:
>
>admin> list
>[in IP-ROUTE/nas1]
>name* = nas1
>dest-address = 204.225.16.0/20
>netmask = 255.255.240.0
>gateway-address = 199.243.225.1
>metric = 2
>cost = 1
>preference = 60
>third-party = no
>ase-type = type-1
>ase-tag = c0:00:00:00
>private-route = no
>active-route = yes
>ase7-adv = N/A
>vrouter = ""
>inter-vrouter = ""
>
>But, if I try to trace to this address from the TNT itself, it goes out
>through my main Internet connection. Obviously, the goal here is to remove
>as much direct traffic from the Internet as possible.  What am I doing
>wrong?


__________________________________
Keith Willis
Director of Information Technology
Talon Computer Consulting, Inc.
Voice:  (903) 531-9983
http://www.taloncc.com
info@taloncc.com

**********************************
Makers of the MaxStat Session Viewer
If you have a Remote Access Server, you need MaxStat!

http://www.MaxStat.com
MaxStat@MaxStat.com
**********************************
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>