Re: (ASCEND) PRI Setup between Nortel NT and Ascend TNT

[Matt Holdrege <matt@ascend.com>]

This has always been one of the most difficult configurations. Every time
I've had to connect Ascend to a Nortel PBX, we've had to get a Nortel PBX
expert in for a day or two to get the PBX config right. But once he did
that, everything worked fine.

It's been a while for me, but isn't Release 14 from many years ago?


At 09:43 AM 6/16/99 -0700, John Hough wrote:
>We sent the following question into Ascend support and their answer
>was to read the manual on how to configure the PRI.  They were nice
>enough to send us a reference for the BRI configuration.  I suspect
>there is a compatiblity problem between the Release on the Nortel
>Switch and the TNT.  Any help is appreciated.
>
>>Subject: PRI Switch Type
>> Our MAX TNT is running 7.0.4.  We are trying to get PRI from a provider
>> that is running a Nortel NT Release 14 with ISDN Option.  They can emulate
>> the following switch types for PRI: DMS100, DMS250, ATT4ESS, Meridian
>> SL-1, Norwegian SYS-12.
>>
>>So far we have been unable to establish a D-Channel (the T-1 is up but
>>stays in "DF").  Do you have any configuration reccomendations?
>
>John Hough
>IWBC.NET
>IT Manager
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>