Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Config
Are pools 3 an 4 your static IP's
If so, you can't do it that way.
You would need in your radius for a static IP is the following:
Auth-Type = Pam, Simultaneous-Use = 1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed Address = x.x.x.x,
Framed Netmask = 255.255.255.255,
Hope this is what you were asking.
John
---- Original Message ----
From: marty@techair.net
To: ascend-users@bungi.com
Subject: RE: (ASCEND) Config
Date: Thu, 13 Apr 2000 15:39:56 +0800 (PHT)
>Hi,
>
>I have this in my cistron-radius users file, but it doesn't work. I
am
>running 7.0.3, ebaxk.m60.
>
>From MAILER-DAEMON Thu Apr 13 15:37:43 2000
>Date: Thu, 13 Apr 2000 15:37:43 +0800 (PHT)
>From: Mail System Internal Data <MAILER-DAEMON@techair.net>
>Subject: DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
>X-IMAP: 0955611463 0000000000
>Status: RO
>
>This text is part of the internal format of your mail folder, and is
not
>a real message. It is created automatically by the mail system
software.
>If deleted, important folder data will be lost, and it will be
re-created
>with the data reset to initial values.
>
>From marty@techair.net Thu Apr 13 15:37:10 2000 +0800
>Status: R
>X-Status:
>X-Keywords:
>Return-Path: <root@acts.newgen.net.ph>
>Received: from acts.newgen.net.ph (acts.newgen.net.ph [203.176.40.4])
> by genesis.newgen.net.ph (8.9.3/8.9.3) with ESMTP id PAA14433
> for <marty@cal.net.ph>; Thu, 13 Apr 2000 15:37:10 +0800
>Received: from localhost (root@localhost)
> by acts.newgen.net.ph (8.9.3/8.9.3) with ESMTP id PAA09543
> for <marty@cal.net.ph>; Thu, 13 Apr 2000 15:13:11 +0800
>Date: Thu, 13 Apr 2000 15:13:11 +0800 (PHT)
>From: System Administrator <root@acts.newgen.net.ph>
>To: marty@cal.net.ph
>Message-ID:
<Pine.LNX.4.10.10004131512190.9538-100000@acts.newgen.net.ph>
>MIME-Version: 1.0
>Content-Type: TEXT/PLAIN; charset=US-ASCII
>
>### PPP connections ####
>
># Reject NAS authentication
>#appleroute-ephesians-1 Auth-Type = Reject
>#banner Auth-Type = Reject
>#bridge-ephesians-1 Auth-Type = Reject
>#dovbs-1 Auth-Type = Reject
>#dovbs-ephesians-1 Auth-Type = Reject
>#frdlink-ephesians-1 Auth-Type = Reject
>#initial-banner Auth-Type = Reject
>#initial-banner-ephesians Auth-Type = Reject
>#ipxroute-1 Auth-Type = Reject
>#ipxroute-ephesians-1 Auth-Type = Reject
>#permconn-ephesians-1 Auth-Type = Reject
>#pools-ephesians Auth-Type = Reject
>#route-1 Auth-Type = Reject
>#route-ephesians-1 Auth-Type = Reject
>#route-ephesians-1 Auth-Type = Reject
>
>#appleroute-jeremiah-1 Auth-Type = Reject
>#banner Auth-Type = Reject
>#bridge-jeremiah-1 Auth-Type = Reject
>#dovbs-1 Auth-Type = Reject
>#dovbs-jeremiah-1 Auth-Type = Reject
>#frdlink-jeremiah-1 Auth-Type = Reject
>#initial-banner Auth-Type = Reject
>#initial-banner-jeremiah Auth-Type = Reject
>#ipxroute-1 Auth-Type = Reject
>#ipxroute-jeremiah-1 Auth-Type = Reject
>#permconn-jeremiah-1 Auth-Type = Reject
>#pools-jeremiah Auth-Type = Reject
>#route-1 Auth-Type = Reject
>#route-jeremiah-1 Auth-Type = Reject
>#route-jeremiah-1 Auth-Type = Reject
>
># IP Pool
>pools-ephesians Password = "ascend"
> Ascend-IP-Pool-Definition = "3 203.176.19.1 126",
> Ascend-IP-Pool-Definition = "4 202.138.140.129 126"
>
>user1 Auth-Type = Pam, Simultaneous-Use = 1
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Ascend-Assign-IP-Pool = 4,
> Ascend-Idle-Limit = 300
>
>I've 2 pools defined in MAX config using the same ip block as above.
>Comments please...
>
>Thanks in advance,
>Angelo
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>