TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCLUG:1127] diald and RedHat



Make sure you passing right pppd options in diald that you use with, say,
ifup ppp0. I didn't have user username (or sometinh like that) and it
didn't work. Is diald trying to dial, or is it not even trying. If the
latter, good luck, but I don't know. If the former, have ifup (or whatever
works) send the pppd options to a file and compare it with what diald
runs. 


Hope this helps and good luck,

Ben 

On Wed, 9 Sep 1998, Bob Tanner wrote:

> I have been playing with diald under RedHat 5.0. 
> 
> Anyone wanna throw their support behind diald as a something good?
> 
> I have a linux box on a Ethernet network, my primary connection is via
> ISDN. I want to use diald to configure up a secondary route via the
> modem. I got the routing right, but diald does not seem to call out
> like the documentation says it will.
> 
> I have even yanked the nic card and still no dialout.
> 
> Anyone have diald working successfully?
> 
> -- 
> Bob Tanner <tanner@real-time.com>       | Phone : (612)943-8700
> http://www.real-time.com                | Fax   : (612)943-8500
> Key fingerprint =  6C E9 51 4F D5 3E 4C 66 62 A9 10 E5 35 85 39 D9 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com
> 
>