Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Who runs IDSL ?!?
Hy,
check out the following:
Instead of pre dialing the trunk group #
pre-dial the following:
2 (means internal) 4 (means slot#4) 1 (means port#1)
so in this example, the pre-dial is
241xxxxxxxxx
I personally never tested this, but i heard that it should
work
Christof Rohlaender
At 01:13 PM 2/6/98 +0100, Andre Beck wrote:
>On Tue, Feb 03, 1998 at 08:48:04PM -0500, Jim Howard wrote:
>> At 00:33 1998/02/04 +0100, Winfried Haug wrote:
>> >> >Must i use trunk groups...
>> >>
>> >> Yes.
>>
>> >the trunk group. But i can only use digites 4 to 9... hmm i need one for
>> >my E1 Ports (normalle this is 9 by default)., So i have Trunk Groups 4 to
>> >8... hmmm how can i get 8 Ports working with that...
>>
>> will it work if you set all IDSL ports to the same trunk group?
>
>Probably not. The reason for this somewhat strange setup is likely that
>he uses "SPV", an old and abandoned feature of the german Telekom (-T--)
>which dedicates an S0 to a destination when you dial a certain number.
>This was cheaper than dialing with a normal S0, and cheaper than getting
>a real nailed S0, so it was used intensely in Germany. With the advent
>of DSS1 the -T-- dropped this feature but some people still use it. For
>them, the trunk group limit is a real problem. The only other reason
>for this setup that I could think off is that certain S0 go to different
>telco carriers (Yeah ! We finally got -T-- out of the monopoly over here ;),
>or are a private infrastructure alltogether. If IDSL is the next situation
>where one has to use trunk groups to separate lines it will indeed become
>necessary to increase the number of available ones.
>
>--
>
>Kanther-Line: PGP SSH IDEA MD5 GOST RIPE-MD160 3DES RSA FEAL32 RC4
>
>+-o-+--------------------------------------------------------+-o-+
>| o | \\\- Brain Inside -/// | o |
>| o | ^^^^^^^^^^^^^^ | o |
>| o | Andre' Beck (ABPSoft) beck@ibh-dd.de XLink PoP Dresden | o |
>+-o-+--------------------------------------------------------+-o-+
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: