Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Static Routes in Radius/Max4048
Ok, this is starting to drive me nuts...
We're running a 4048 with 5.0Ap42 in it. Prior to this, we had stuck with
5.0Ap33 and had a fixed static route configured in the Max... This didn't
always stick (lost it about twice a month and the route simply had to be
disabled and re-enabled and it was fine)... With p42, EVERY time the
customer dials in, I have to disable the route and re-enable it -
definitely worse!
So now I'm trying to just do it with Radius - is this not a correct Radius
entry to add a static-route to a dialup user??
username Password="userpw"
Framed-Protocol = PPP,
Ascend-Idle-Limit = 0,
Framed-Address = 207.194.216.57,
Framed-Route = "207.194.217.192/26 207.194.216.57 1",
Framed-Netmask = 255.255.255.255
It doesn't... The user logs in just fine but no route... 8(
I must be missing something here... I know this MUST be working out there
for people -- it just seems to common a need to go along so quietly...
---------------------------------
Jamie Penner
Nisa Internet Technologies Inc.
Nanaimo, BC Canada
EMail: jpenner@nisa.net
URL: http://www.nisa.com
Ph: 250-751-1111
Fax: 250-758-3511
---------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>