Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Max does not dial out on Radius

Kevin A. Smith wrote:
> 
> At 02:20 PM 6/15/98 +0200, Klaus Noack wrote:
> >Hello,
> >
> >I try to get a max2000 (5.0Ap11) to dial out on radius
> >request but it does not work.
> >The other way round (remote calls max) works.
> >I got the route for dial-out in the max via radius.
> >(Thanks to Paul Rolland for the "Adv Dialout Routes" hint)
> >Then I do a telnet to the remote (P50).
> >The Max ask for the dial-out profile (radius -x) but
> >does not dial out - nothings happens. Any glue?
> 
> On the MAX you could run in debug: "radif" to see if it recognizes
> that it got the testp50-out profile OK.

My MAX do not have this command :-(
Only two command for radius accounting (radacct and radSessDump)
Is there any other debug command for looking at radius?

BTW nearly the same profile works for dialin. (See below)

> Is it possible that the dial-out happens but failed due to some
> error? (Maybe "show isdn" in terminal server may help).

Nothing which belongs to the testp50 appears there.
In syslog or in the CDR window nothing happens.

If I do continues a "show iproute" during the trys, never a
host routing for 10.10.200.100 appears there (only net routing)
10.10.200.0/24     10.10.200.100   wanidle0 SG       1   4      10   78436

During dialin there is a route like the route from a NVRAM profile:
10.10.200.100/32   10.10.200.100   wan89    rT       1   1       0       9

Perhaps here is the problem but I don't know how to solve it.

> >whole "users" test-file (with dialin and dialout entry):
> >
> >route-1 Password="ascend", User-Service=Dialout-Framed-User
> >  Framed-Route="10.10.200.0/24 10.10.200.100 4 n testp50-out"
> >
> >821xxxxxx8 Password="Ascend-CLID"
> >  Ascend-Require-Auth=Require-Auth
> >
> >testp50 Password="xxxxxx", Caller-Id="821xxxxxxx8"
> >  User-Service=Framed-User,
> >  Framed-Protocol=PPP,
> >  Ascend-Route-IP=Route-IP-Yes,
> >  Ascend-Link-Compression=Link-Comp-Stac,
> >  Framed-Compression=Van-Jacobsen-TCP-IP,
> >  Framed-Address=10.10.200.100,
> >  Framed-Netmask=255.255.255.0,
> >  Ascend-Metric=1,
> >  Ascend-Idle-Limit=10,
> >  Ascend-Data-Svc=Switched-64K
> >
> >testp50-out Password="ascend", User-Service=Dialout-Framed-User
> >  User-Name="testp50",
> >  Framed-Protocol=PPP,
> >  Ascend-Dial-Number="0821xxxxxx8",
> >  Ascend-Route-IP=Route-IP-Yes,
> >  Ascend-Send-Auth=Send-Auth-CHAP,
> >  Ascend-Send-Secret="xxxxxx",
> >  Ascend-Link-Compression=Link-Comp-Stac,
> >  Framed-Compression=Van-Jacobsen-TCP-IP,
> >  Framed-Address=10.10.200.100,
> >  Framed-Netmask=255.255.255.0,
> >  Ascend-Metric=1,
> >  Ascend-Idle-Limit=10,
> >  Ascend-Data-Svc=Switched-64K
> >
> >DEFAULT Password = "Ascend-CLID"
> >  Ascend-Route-IP=Route-IP-Yes,
> >  Ascend-Route-IPX=Route-IPX-No,
> >  Ascend-Bridge=Bridge-No
> >
> >As a conection profile in the max this works.
> >
> >a iproute show says (radius cfg):
> >10.10.200.0/24     10.10.200.100   wanidle0 SG       1   4       0      25
> >the same as a connection profile:
> >10.10.200.0/24     10.10.200.100   wanidle0 SG     120   7     181 2756763
> >10.10.200.100/32   10.10.200.100   wanidle0 S      120   7       8 2756763
> >
> >Perhaps the host routing to 10.10.200.100 is missing, but I think the
> >radius request for testp50-out should give it to the max.
> >
> >Thanks for reading my probably simple problem.
> >If you need more info please ask.

> Kevin Smith                     Ascend Communications...
> Customer Satisfaction   ...where Network Solutions never end.

Ciao
    Klaus

--
Dipl.-Inform. Klaus Noack
Syscomp GmbH / Abteilung DFUE
August-Wessels-Strasse 5
D-86154 Augsburg / Germany
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
Follow-Ups: References: