Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max does not dial out on Radius
At 02:20 PM 6/15/98 +0200, Klaus Noack wrote:
>Hello,
>
>I try to get a max2000 (5.0Ap11) to dial out on radius
>request but it does not work.
>The other way round (remote calls max) works.
>I got the route for dial-out in the max via radius.
>(Thanks to Paul Rolland for the "Adv Dialout Routes" hint)
>Then I do a telnet to the remote (P50).
>The Max ask for the dial-out profile (radius -x) but
>does not dial out - nothings happens. Any glue?
On the MAX you could run in debug: "radif" to see if it recognizes
that it got the testp50-out profile OK.
Is it possible that the dial-out happens but failed due to some
error? (Maybe "show isdn" in terminal server may help).
>whole "users" test-file (with dialin and dialout entry):
>
>route-1 Password="ascend", User-Service=Dialout-Framed-User
> Framed-Route="10.10.200.0/24 10.10.200.100 4 n testp50-out"
>
>821xxxxxx8 Password="Ascend-CLID"
> Ascend-Require-Auth=Require-Auth
>
>testp50 Password="xxxxxx", Caller-Id="821xxxxxxx8"
> User-Service=Framed-User,
> Framed-Protocol=PPP,
> Ascend-Route-IP=Route-IP-Yes,
> Ascend-Link-Compression=Link-Comp-Stac,
> Framed-Compression=Van-Jacobsen-TCP-IP,
> Framed-Address=10.10.200.100,
> Framed-Netmask=255.255.255.0,
> Ascend-Metric=1,
> Ascend-Idle-Limit=10,
> Ascend-Data-Svc=Switched-64K
>
>testp50-out Password="ascend", User-Service=Dialout-Framed-User
> User-Name="testp50",
> Framed-Protocol=PPP,
> Ascend-Dial-Number="0821xxxxxx8",
> Ascend-Route-IP=Route-IP-Yes,
> Ascend-Send-Auth=Send-Auth-CHAP,
> Ascend-Send-Secret="xxxxxx",
> Ascend-Link-Compression=Link-Comp-Stac,
> Framed-Compression=Van-Jacobsen-TCP-IP,
> Framed-Address=10.10.200.100,
> Framed-Netmask=255.255.255.0,
> Ascend-Metric=1,
> Ascend-Idle-Limit=10,
> Ascend-Data-Svc=Switched-64K
>
>DEFAULT Password = "Ascend-CLID"
> Ascend-Route-IP=Route-IP-Yes,
> Ascend-Route-IPX=Route-IPX-No,
> Ascend-Bridge=Bridge-No
>
>As a conection profile in the max this works.
>
>a iproute show says (radius cfg):
>10.10.200.0/24 10.10.200.100 wanidle0 SG 1 4 0 25
>the same as a connection profile:
>10.10.200.0/24 10.10.200.100 wanidle0 SG 120 7 181 2756763
>10.10.200.100/32 10.10.200.100 wanidle0 S 120 7 8 2756763
>
>Perhaps the host routing to 10.10.200.100 is missing, but I think the
>radius request for testp50-out should give it to the max.
>
>Thanks for reading my probably simple problem.
>If you need more info please ask.
>
>Ciao
> Klaus
>
>--
>Dipl.-Inform. Klaus Noack
>Syscomp GmbH / Abteilung DFUE
>August-Wessels-Strasse 5
>D-86154 Augsburg / Germany
Kevin Smith Ascend Communications...
Customer Satisfaction ...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: