Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ASCEND) Max does not dial out on Radius

Hello,

I try to get a max2000 (5.0Ap11) to dial out on radius
request but it does not work.
The other way round (remote calls max) works.
I got the route for dial-out in the max via radius.
(Thanks to Paul Rolland for the "Adv Dialout Routes" hint)
Then I do a telnet to the remote (P50).
The Max ask for the dial-out profile (radius -x) but
does not dial out - nothings happens. Any glue?

whole "users" test-file (with dialin and dialout entry):

route-1 Password="ascend", User-Service=Dialout-Framed-User
  Framed-Route="10.10.200.0/24 10.10.200.100 4 n testp50-out"

821xxxxxx8 Password="Ascend-CLID"
  Ascend-Require-Auth=Require-Auth

testp50 Password="xxxxxx", Caller-Id="821xxxxxxx8"
  User-Service=Framed-User,
  Framed-Protocol=PPP,
  Ascend-Route-IP=Route-IP-Yes,
  Ascend-Link-Compression=Link-Comp-Stac,
  Framed-Compression=Van-Jacobsen-TCP-IP,
  Framed-Address=10.10.200.100,
  Framed-Netmask=255.255.255.0,
  Ascend-Metric=1,
  Ascend-Idle-Limit=10,
  Ascend-Data-Svc=Switched-64K

testp50-out Password="ascend", User-Service=Dialout-Framed-User
  User-Name="testp50",
  Framed-Protocol=PPP,
  Ascend-Dial-Number="0821xxxxxx8",
  Ascend-Route-IP=Route-IP-Yes,
  Ascend-Send-Auth=Send-Auth-CHAP,
  Ascend-Send-Secret="xxxxxx",
  Ascend-Link-Compression=Link-Comp-Stac,
  Framed-Compression=Van-Jacobsen-TCP-IP,
  Framed-Address=10.10.200.100,
  Framed-Netmask=255.255.255.0,
  Ascend-Metric=1,
  Ascend-Idle-Limit=10,
  Ascend-Data-Svc=Switched-64K

DEFAULT Password = "Ascend-CLID"
  Ascend-Route-IP=Route-IP-Yes,
  Ascend-Route-IPX=Route-IPX-No,
  Ascend-Bridge=Bridge-No

As a conection profile in the max this works.

a iproute show says (radius cfg):
10.10.200.0/24     10.10.200.100   wanidle0 SG       1   4       0      25
the same as a connection profile:
10.10.200.0/24     10.10.200.100   wanidle0 SG     120   7     181 2756763
10.10.200.100/32   10.10.200.100   wanidle0 S      120   7       8 2756763

Perhaps the host routing to 10.10.200.100 is missing, but I think the
radius request for testp50-out should give it to the max.

Thanks for reading my probably simple problem.
If you need more info please ask.

Ciao
    Klaus

--
Dipl.-Inform. Klaus Noack
Syscomp GmbH / Abteilung DFUE
August-Wessels-Strasse 5
D-86154 Augsburg / Germany
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
Follow-Ups: