Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max4000 & Cisco2511
You must use PPP encapsulation on the line for the cisco
and the MAX to talk to each other. HDLC is a proprietary
Cisco encapsulation.
On the cisco:
!
interface XYZ
encapsulation ppp
On the MAX... good question :) but if there's a PPP encapsulation
option, you should be all set.
At 11:07 PM 6/18/98 +0200, you wrote:
>Hi,
> I'm trying to connect a MAX4000 and a Cisco 2511 with a 64k
>leased line. I configured a connection on MAX and the Serial interface
>on the Cisco. I choosed to use HDLC (and on the MAX I tried to set
>EU-RAW
>and EU-UI).
>The debug of Cisco says that the router receives HDLC packets but
>they are unknown or something similar ...
>In effect the protocol of the line is down.
>Can you help me? Have you a working configuration of the routers?
>
>Thanks a lot!
>
> danilo
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Danilo DEMARCHI
>Politecnico di Torino Dipartimento di Elettronica
> C.so Duca degli Abruzzi, 24
> 10129 TORINO (Italy)
>
>Phone +39 011 5644122 Fax +39 011 5644112
> E-Mail danilo.demarchi@polito.it
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: