Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max4000 & Cisco2511
On Thu, 18 Jun 1998, Danilo Demarchi wrote:
> Hi,
> I'm trying to connect a MAX4000 and a Cisco 2511 with a 64k
> leased line. I configured a connection on MAX and the Serial interface
> on the Cisco. I choosed to use HDLC (and on the MAX I tried to set
> EU-RAW and EU-UI).
Try setting both the Cisco and the MAX to PPP (plain old PPP, "standards
stuff).
> The debug of Cisco says that the router receives HDLC packets but
> they are unknown or something similar ...
> In effect the protocol of the line is down.
IIRC, Cisco's "HDLC" is Cisco-proprietary - only useful for Cisco-Cisco -
so this result is not surprising.
> Can you help me? Have you a working configuration of the routers?
Sorry, no working config, but it _should_ work with both ends configured
for PPP (that's the _theory_ of standards like PPP ;-). Of course this
may lead you into the problems of authentication - but if it's really a
leased line you hould be able to safely use no authentication, at least
for initial testing.
HTH,
Neale.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: