Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max4000 & Cisco2511
We did it by means of Frame Relay encaps
>You must use PPP encapsulation on the line for the cisco
>and the MAX to talk to each other. HDLC is a proprietary
>Cisco encapsulation.
>
>On the cisco:
>!
>interface XYZ
>encapsulation ppp
>
>
>On the MAX... good question :) but if there's a PPP encapsulation
>option, you should be all set.
>
>
>At 11:07 PM 6/18/98 +0200, you wrote:
>>Hi,
>> I'm trying to connect a MAX4000 and a Cisco 2511 with a 64k
>>leased line. I configured a connection on MAX and the Serial interface
>>on the Cisco. I choosed to use HDLC (and on the MAX I tried to set
>>EU-RAW
>>and EU-UI).
>>The debug of Cisco says that the router receives HDLC packets but
>>they are unknown or something similar ...
>>In effect the protocol of the line is down.
>>Can you help me? Have you a working configuration of the routers?
>>
>>Thanks a lot!
>>
>> danilo
>>
>>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Danilo DEMARCHI
>>Politecnico di Torino Dipartimento di Elettronica
>> C.so Duca degli Abruzzi, 24
>> 10129 TORINO (Italy)
>>
>>Phone +39 011 5644122 Fax +39 011 5644112
>> E-Mail danilo.demarchi@polito.it
>>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>++ Ascend Users Mailing List ++
>>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>