Re: (ASCEND) Max 4000 - Newbie questions - Basic config

["Alex." <acrossnik@hotmail.com>]

>The Alarm light is on.

Check if there is 3rd line enabled or disabled. By default it is enabled.

>For the moment I can ping the Ascend unit (and do a telnet on it) > > form 
>the local network but not from another location behind the router

Probably IP routing misconfiguration.

Alex


>From: "Eric Pieuchot" <pieuchot@echoweb.net>
>To: <ascend-users@bungi.com>
>Subject: (ASCEND) Max 4000 - Newbie questions - Basic config
>Date: Tue, 8 Jun 1999 13:21:32 -0700
>
>Hello,
>
>Our company is an ISP with two different locations:
>There is a main LAN linked to another (smaller) via a T1 line
>
>It is in this second one where we want to setup the ascend Unit (Max 4000)
>in order to replace a
>Compaq Microcom 4000 and a Livingston Portmaster.
>
>First problem we noticed : after booting the Max 4000, The Alarm light is
>on. I am wondering  if the kind of cable is good . Do we use a RJ48C or RJ
>45 cable
>to link the Max4000 ( Wan1 Port ) to the T1 line plug of the wall ?
>
>Then our unit is linked to a 100 BaseT hub with a RJ45 cable ,on this hub 
>is
>also connected :
>     a pc worstation (Win95 - NavisConnect 1.0) 206.163.166.169
>     a Portmaster 206.163.166.140
>     and a Cisco 1000 router 206.163.166.129
>
>On the other side of the T1 line, in the main LAN we have a cisco router
>206.163.137.252
>our DNS Server (206.163.137.4) and our Radius server
>
>For the moment I can ping the Ascend unit (and do a telnet on it) form the
>local network but not from another location behind the router
>
>Can somebody  give me a basic configuration for the Ascend Max 4000 ?
>
>
>Thanks in advance
>
>Eric
>Echoweb LLC
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>