Re: (ASCEND) Max4000 with 2 Default routes???

[John Coy <jcoy@anc.net>]

I think that R flag means that it learned the new default gateway
via RIP?

Look at Ethernet->Static Rtes and remove the previous
static route from the Default location and see if that
helps.

I am not sure how Ascend units handle two default routes with the
same preference, but the second one has a metric of 2, so your
unit will use xxx.xxx.200.7 as it's default route.

Hope hat helps,

John

At 06:27 PM 1/13/00 +1100, you wrote:
>Hi all,
>
>Is it possible to have 2 default gateways? Below is the results of a "sh 
>ip routes" on our Max4000
>
>Destination        Gateway         IF       Flg   Pref Met     Use     Age
>0.0.0.0/0          xxx.xxx.200.7    ie0      SGP    100   1   11677    6466
>0.0.0.0/0          xxx.xxx.200.1    ie0      *RG    100   2       0  185229
>127.0.0.0/8        -               bh0      CP       0   0       0  185233
>127.0.0.1/32       -               local    CP       0   0       0  185233
>127.0.0.2/32       -               rj0      CP       0   0       0  185233
>
>I have the xxx.xxx.200.7 set as the Default gateway (xxx.xxx.200.1 used to 
>be it's default gateway and is still operational)
>
>I've rebooted the machine and still it's there, is it something to worry 
>about?
>
>Thanks
>
>Ray
>
>
>
>====================================
>Clothes do make the man.
>Naked people have little or no influence on society.
>====================================
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:   <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>