Re: (ASCEND) pending 195 list

[Steve Hovey <shovey@buffnet.net>]

my 7.0.3s did a solid tone jobby like this too - I had to go back to
6.1.7

On Thu, 23 Mar 2000, Paul Thomas wrote:

> That means the modem has been marked as bad for one reason or another and 
> needs to be reset.  That would be swell and all if ascend could reset just 
> one modem but that is something they cannot do at this time.  The modem 
> will stay on the 195 list until all other modems on a modem card are unused 
> and only then will the modem be removed from the 195 list.  The long steady 
> tone comes from the calls being routed to the HDLC (slot 9) card on the 
> max...you can see this in the 'show users' command.
> 
> We have found that the only way to eliminate this is to downgrade the 
> firmware to 7.0.4 which is the latest version of the firmware that does not 
> have a 195 list therefore the problem is not possible.
> 
> The last word I have had from Ascend is that the issue is being passed on 
> to engineers so I can only hope there is a fix for this on the way.
> Paul
> 
> At 08:29 PM 3/22/2000 -0600, list@mail.cyberback.com wrote:
> >anyone know what the pending 195 list is in the avm command in diagnostic
> >mode?
> >
> >occasionally, my 4048 will start adding modems to this list and I get a
> >long solid tone when dialing in...
> >
> >TIA,
> >Del
> >
> >++ Ascend Users Mailing List ++
> >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd:   <http://www.nealis.net/ascend/faq>
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>