Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Re-iterate: 6.1.3 does NOT fix IP address pool leak

Hmmm well we have had no IP Pool leek or memory leek for 3 days on the 6.1.0e8
release which became 6.1.3 if I understood Ascend correctly, or at least it was
part of the upgrade. We run the ftik.40 release here with no RIP, no
Multicasting, Stacking on, no ISDN on two units (another 2 are ISDN PRI), no
OSPF and it works great. You might try turning off Multicasting and see if that
helps you since we ran for 3 days with no reboots, leaks or anything last I
looked at the servers.

Tim Jung
System Admin
Internet Gateway Inc.
tjung@igateway.net

-----Original Message-----
From: Jim Logan <jim@top.net>
To: ascend-users@bungi.com <ascend-users@bungi.com>
Date: Saturday, June 27, 1998 3:13 PM
Subject: Re: (ASCEND) Re-iterate: 6.1.3 does NOT fix IP address pool leak


>At 08:24 AM 6/27/98 -0400, you wrote:
>>
>>> In any case, I have installed rtk.m40/ftk.m40 on three MAX4048 and
>>> the IP address pool leak continues to be an issue.  I am NOT
>>> running anything special - simply using the MAX4048 as a
>>> terminal server to provide Sync/Async dial-up through PRIs.
>>> I am running RIPv2 as the routing protocol and I am using
>>> stacking.
>>
>>Ascend engineering:  if it makes any difference, I am running RIP2,
>>stacking as well and have also seen the pool leak continue with 6.1.3.
>>
>>Maybe the leak only exhibits itself with RIP2 & Stacking.
>>
>
> We have no Stacking set, Rip=off, Rip2 Use Mutlicast=Yes  ...
>
>And still the Ip Pool issue after Ftik.m40   (tho don't seem quite as
>bad??) Hard to tell during low traffic periods.
>
>
>***** Top Net InterNet Services *****
>Omaha, Nebraska         Husker Heaven
>www.top.net            (402) 291-1542
> Visit Our BBS at: www.hawgwild.com
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>