Re: (ASCEND) Troubleshooting a Pipeline Connection Continued

["Joe Max" <max_and_tnt@hotmail.com>]

Without looking into more details, it sounds as if the userid and password 
you are sending to swbell is not what they expect.

Did you try a 'wanopen 64'? It will show the packets exchanged
during call setup. It may indicate a little more clearly what the problem 
might be, but I'm betting the userid/password is wrong.


>From: Randy Snow <snow@apassmore.com>
>To: 'Joe Max' <max_and_tnt@hotmail.com>, "'ascend-users@bungi.com'"  
><ascend-users@bungi.com>, 'Marcus Åkesson'  <marcus.akesson@home.se>
>Subject: (ASCEND) Troubleshooting a Pipeline Connection Continued
>Date: Fri, 7 Apr 2000 10:46:57 -0500
>
>Ok, with the suggestions from both Joe and Marcus, I dumbed down the 
>connect
>to simple PPP and tried both CHAP and PAP logins.  If I'm not mistaken.  
>The
>line indicating the problem is:
>
>PPPIF-16: Administrative CLOSE of LAYER_AUTH : Close OK
>
>Can anyone please tell me what these logs mean?  I did check the PW and 
>user
>name. But if this is indicating a problem with that, I'll check with SW 
>Bell
>again.
>
>Ok, here goes....here is PAP
>
>PAP:
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>PPPIF: open: routeid 13, incoming NO
>PPPIF-16: _initAuthentication
>PPPIF-16: auth mode 1
>PPPIF-16: PAP auth, outgoing
>ppp_open, ifnum = 16, layer = 0
>ppp_openCont
>PPP-16: Redirect digital
>PPPIF-16: Link Is up.
>PPPIF-16: pppMpNegUntimeout last 0 layer 0
>PPPIF-16: pppMpNegUntimeout last 0 layer 0
>PPPIF-16: LCP Opened, local 'swbell', remote ''
>PPPIF-16: _openAuthentication
>ppp_open, ifnum = 16, layer = 1
>ppp_openCont
>PPP-16: Redirect digital
>PPPIF-16: Administrative CLOSE of LAYER_AUTH : Close OK
>PPPIF-16: Link Is closing. layer 0
>
>
>Here goes an attempt at CHAP (SW BELL Tech said they use CHAP)
>
>CHAP:
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>PPPIF: open: routeid 14, incoming NO
>PPPIF-17: _initAuthentication
>PPPIF-17: auth mode 2
>PPPIF-17: bidirectional=0
>PPPIF-17: CHAP auth, outgoing
>ppp_open, ifnum = 17, layer = 0
>ppp_openCont
>PPP-17: Redirect digital
>PPPIF-17: Link Is up.
>PPPIF-17: pppMpNegUntimeout last 0 layer 0
>PPPIF-17: pppMpNegUntimeout last 0 layer 0
>PPPIF-17: LCP Opened, local 'swbell', remote ''
>PPPIF-17: _openAuthentication
>ppp_open, ifnum = 17, layer = 1
>ppp_openCont
>PPP-17: Redirect digital
>PPPIF-17: Administrative CLOSE of LAYER_AUTH : Close OK
>PPPIF-17: Link Is closing. layer 0
>
>
>Here is a connection that I setup with another ISP, to show that I do know
>what I'm doing. :)
>
>This is a MPP connection, using NAT and dynamic IP assignment for the
>Pipeline 85.  Both channels are used.
>
>Working:
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>PPPIF: open: routeid 16, incoming NO
>PPPIF-19: _initAuthentication
>PPPIF-19: auth mode 1
>PPPIF-19: PAP auth, outgoing
>ppp_open, ifnum = 19, layer = 0
>ppp_openCont
>PPP-19: Redirect digital
>PPPIF-19: Link Is up.
>PPPIF-19: pppMpNegUntimeout last 0 layer 0
>PPPIF-19: pppMpNegUntimeout last 0 layer 0
>PPPIF-19: LCP Opened, local 'ionet', remote ''
>PPPIF-19: _openAuthentication
>ppp_open, ifnum = 19, layer = 1
>ppp_openCont
>PPP-19: Redirect digital
>PPPIF-19: pppMpNegUntimeout last 0 layer 1
>PPPIF-19: Auth Opened
>PPPIF-19: Remote hostName is ''
>PPPIF-19: prep MP bundle for
>_authOpened:ss->mpID == 0:ionet
>PPPIF-19: new MP bundle
>PPPIF-19: First channel, MpID 64
>PPPIF: Assigning vjInfo (33D450) and bncpInfo(33D25C)
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>ppp_open, ifnum = 19, layer = 4
>ppp_openCont
>PPPIF-19: pppMpSendNeg Pkt
>PPP-19: Redirect digital
>PPPIF-19: pppMpNegTimeout layer 4
>../pppif.c:1186 - 19 ppp is 25f7fc, aysnc is 0, syncAsync is 0
>PPPIF-19: opening IPNCP: 0.0.0.0 -> 100.100.100.100
>ppp_open, ifnum = 19, layer = 4
>ppp_openCont
>PPPIF-19: pppMpSendNeg Pkt
>PPP-19: Redirect digital
>PPPIF-19: pppMpSendNeg Pkt
>PPPIF-19: pppMpNegTimeout layer 4
>PPPIF-19: pppMpSendNeg Pkt
>PPPIF-19: pppMpSendNeg Pkt
>PPPIF-19: pppMpNegTimeout layer 4
>PPPIF-19: pppMpNegUntimeout last 0 layer 4
>PPPIF-19: pppMpNegUntimeout last 0 layer 4
>PPPIF-19: IPNCP Opened to 38.195.131.111
>natAssignAddress:natInetAddr 38.193.54.18
>_addStaticMapEntry: Add new:113 old:113
>NATLAN_SINGLE_IP natRouteUpdate: adding default route to 100.100.100.100
>NAT: setXlat ifNum 19; dynamicIp 1; localIp 38.193.54.18
>PPPIF: open: routeid 17, incoming NO
>PPPIF-1: _initAuthentication
>PPPIF-1: auth mode 1
>PPPIF-1: PAP auth, outgoing
>ppp_open, ifnum = 1, layer = 0
>ppp_openCont
>PPP-1: Redirect digital
>PPPIF-1: Link Is up.
>PPPIF-1: pppMpNegUntimeout last 0 layer 0
>PPPIF-1: pppMpNegUntimeout last 0 layer 0
>PPPIF-1: LCP Opened, local 'ionet', remote ''
>PPPIF-1: _openAuthentication
>ppp_open, ifnum = 1, layer = 1
>ppp_openCont
>PPP-1: Redirect digital
>PPPIF-1: pppMpNegUntimeout last 0 layer 1
>PPPIF-1: Auth Opened
>PPPIF-1: Remote hostName is ''
>PPPIF-1: prep MP bundle for
>PPPIF-1: subseq chan, MpID 64
>PPPIF: Pre-assigned vjInfo (33D450) and bncpInfo (33D25C)
>IsNatProfile Sticky-enabl: 0,Addr:0.0.0.0
>NAT: setXlat ifNum 1; dynamicIp 1; localIp 0.0.0.0
>
>
>If anyone could offer suggestions why the SW Bell Connection is dropping
>each time, I would appreciate it greatly! :)  Thank you very much for
>helping me get this far.

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>