(ASCEND) MAX TNT TAOS 8.0.2 SOFTWARE SNMP anomalies

[Ed Bachman <edba@fast.net>]

Anyone notice the SNMP anomalies in 8.0.x?

under previouos versions of TAOS (7.x back to 2.x), the following two calls
will produce a pair of lists that line-by-line refer to the same sessionID,
meaning you can access the same session's details in both mibs using the
same index value.

snmpwalk maxname community enterprises.529.11.2.1.4 
snmpwalk maxname community enterprises.529.12.2.1.7

are supposed to produce essentially the same data.  not so on taos 8.x, in
which this appears to be broken.  (I noticed this the first time my stats
ran on the test unit running 8.0.1, 8.0.2 exibits the same behaviour.)

I'd appreciate hearing from anyone who's encountered, or better still,
worked around this problem.

Best regards,

Ed Bachman - FASTNET Corporation
edba@fast.net (610)266-6700 http://www.fast.net
FASTNET(r) - Business and Personal Internet Solutions



-----Original Message-----
From: Matt Holdrege [mailto:holdrege@lucent.com]
Sent: Monday, April 10, 2000 9:03 AM
To: ascend-users@bungi.com
Subject: (ASCEND) MAX TNT TAOS 8.0.2 SOFTWARE


TAOS 8.0.2 software for the MAX TNT can be obtained from Customer Support
and
will be released to Manufacturing. This release contains the following:

New features:
* Support for DS3-ATM2 card

Firmware versions:
* Series56 Digital Modem cards (also called CSM/1, TNT-SL-48MOD-S56) 
support V2.0982-K56_2M_DLP_CSM firmware.
* Series56 II Digital Modem cards (also called CSM/3, TNT-SL-48MOD-SGL and 
TNT-SL-48MOD-S-C) support V5.817 firmware.
* Series56 III Digital Modem cards (also called CSM/3V, TNT-SL-48MODV3-S-C) 
support V5.8174 firmware.
* 48-port MultiDSP cards (TNTP-SL-ADI-C or TNTV-SL-ADI-C) support Lucent 
V0.1617.0 firmware.
* 96-port MultiDSP cards (APX8-SL-96DSP) support Lucent V0.1617.0 firmware.

Corrections:
TR Problem corrected
---- -----------------
4047 MAX TNT was not reporting correct service type for V.120.
4427 When a Connection profile was assigned from a VRouter to the global 
VRouter, the local-route entry was not released from the VRouter's routing 
table.
5483 E1/R2 intermittently failed to send expected signaling to the central 
office switch.
5505 Connections with the same interface address or Ascend-PPP-Address 
RADIUS attribute value did not work properly after the first connection 
terminated.
5659 Proxy ARP problem occurred when system was configured with two 
different Ethernet interfaces on the same segment and proxy-mode was set to 
active on both interfaces.
5682 V42bis compression for PHS calls was disabled.
5698 Radstat command and SNMP object radAuthCurrentServerFlag.N could show 
the incorrect value for the current RADIUS authentication server.
258937 Terminal-server Ping command was enabled when user's permission 
level should have disabled it.
6000044 A data filter applied to an Ethernet interface on a slot card did 
not take effect after the port's link state was bounced.
6000060 Filters were sometimes applied improperly to subsequent channels of 
multilink PPP connections.
6000125 Radius Accounting Acct-Session-Id record included a trailing 0x00 
even when EXTERNAL-AUTH:rad-acct-client:acct-radius-compat was set to 
vendor-specific.
6000152 When operating as L2TP access concentrator (LAC), the MAX TNT 
reported incorrect Acct-Input-Octets, Acct-Output-Octets, 
Acct-Input-Packets, and Acct-Output-Packets values for incoming PPP calls 
authenticated via CLID or DNIS.6000158 RADIUS accounting packets

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>