Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Multiple Frame Relay PVCs
> I'm familiar with using the Max 20 as the DCE using a single PVC, but
> there seems to be a few ways to achieve multiple PVCs. I'm not sure
> whether to use Frame Relay circuits or Frame Relay Direct, and
> whether NNI connections are necessary.
I wouldn't advise NNI. Set the Pipelines to DTE, and the Max 20 to DCE.
Use frame relay circuits for the switched PVCs.
You need to create PVCs like this:
Connection profile:
Encapsulation frame relay circuit
frame relay datalink = unit1
dlci = 17
circuit name = unit1-to-unit2
Connection profile:
Encapsulation frame relay circuit
frame relay datalink = unit2
dlci = 17
circuit name = unit1-to-unit2
Connection profile:
Encapsulation frame relay circuit
frame relay datalink = unit1
dlci = 18
circuit name = unit1-to-unit3
Connection profile:
Encapsulation frame relay circuit
frame relay datalink = unit3
dlci = 18
circuit name = unit1-to-unit3
etc..
-Phil
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>